Filter
Top Products
MD – Recording
41
GB
MDs (MiniDisc) let you digitally record and
play music with high quality sound. Another
feature of MDs is track marking. The track
marking feature lets you quickly locate a
specific point or easily edit the recorded tracks.
However, depending on the source you record,
the recording method and the way the track
numbers are recorded differ.
When the source you record from
is:
• CDs loaded in this system’s DVD
player
– The MD deck performs digital recording.
*1
However, the MD deck performs analog
recording in manual recording.
– Track numbers are automatically marked as
on the original CD. However, track numbers
are not marked depending on the track
(page 98).
• DVDs, VIDEO CDs, Super Audio
CDs or MP3 loaded in this
system’s DVD player
– The MD deck performs analog recording.
However, digital recording is performed for
the CD layer of a Super Audio CD hybrid disc
in the same manner as a CD. Also, when the
source is a Super Audio CD with multi-
channel sound, only the sound from the front
L/R speakers is recorded.
– A track number is marked at the beginning of
a recording only, but when you turn on the
Level Synchro Recording Function (page 47),
track numbers are automatically marked on
sync with the level of the input signal.
• Other digital components
connected to the VIDEO/SAT
DIGITAL IN OPTICAL jack
– The MD deck performs digital recording.
*1*2
– Track numbers are marked differently
depending on the source you record.
• This system’s tuner or tape, or
other analog components
connected to the VIDEO/SAT IN
jacks
– The MD deck performs analog recording.
*3
– A track number is marked at the beginning of
a recording only, but when you turn on the
Level Synchro Recording Function (page 47),
track numbers are automatically marked in
sync with the level of the input signal.
• A personal computer
– Only tracks that have been checked out using
the Net MD function can be recorded from a
personal computer. For details, see supplied
accessories “M-crew/SonicStage for Net MD
CD-ROM”.
When you use a partially
recorded MD
You cannot record while overwriting the
recorded tracks.
Recording starts after the recorded tracks.
If you want to erase the recorded tracks, erase
the tracks using Erase Function (page 55).
Note on MD track numbers
On an MD, the track numbers (track sequence),
track start and end point information, etc., are
recorded in the TOC
*4
area independent of the
sound information. You can edit recorded tracks
quickly by modifying the TOC information.
MD – Recording
Before you start recording
continued