Filter
Top Products
ENGLISH
76
When selecting the Dolby PL II Music Parameters
• You can adjust the various surround parameters for optimum surround effect.
■Note:
• The parameter settings are valid only when listening in either Dolby Pro Logic II Music mode or the Dolby Pro Logic IIx
Music mode.
■When adjusting the Panorama mode
This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall
imaging. Select "Off" or "On"(default value:Off).
■When adjusting the Center Width control
This adjusts the center image so it may be heard only from the center speaker, only from the left/right speakers as a phantom
image, or from all three front speakers to varying degrees. The control can be set in 8 steps from 0 to 7 (default value : 3).
■When adjusting the Dimension control
This gradually adjusts the soundfield either towards the front or towards the rear. The control can be set in 7 steps from -3 to
+3(default value : 0).
Continued
When selecting the Dolby Virtual Speaker
• You can select the speaker layout to be used actually for each Dolby Virtual Speaker mode.
■Notes :
• The speaker layout settings are valid only when listening in a Dolby Virtual Speaker mode.
• When the speakers are set to "No", the corresponding speaker layouts cannot be selected.
■When selecting the Dolby Virtual Speaker Reference mode
2 Speaker : When using 2 front speakers only.
↕
3 Speaker : When using 2 front and center speakers.
■When selecting the Dolby Virtual Speaker Wide mode
→ 2 Speaker : When using 2 front speakers only.
↕
3 Speaker : When using 2 front and center speakers.
↕
4 Speaker : When using 2 front and 2 surround speakers.
↕
→ 5 Speaker : When using 2 front, center and 2 surround speakers.
When selecting the Dolby Headphone
• You can select the desired listening mode for Dolby Headphone mode.
■Note:
• The listening mode setting is valid only when playing analog stereo, PCM 2 channel or Dolby Digital 2 channel source.
→ Movie : This provides the surround effect suitable for movie sources.
↕
Music 1 : This provides the surround effect suitable for music sources.
↕
→ Music 2 : This provides less surround effect compared to MUSIC 1 mode.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 76