Filter
Top Products
61
SETTING THE SPEAKER / LISTENING SETUP
• After you have installed this receiver and connected all the components, you should adjust the speaker settings for the
optimum sound acoustics according to your environment and speaker layout.
• Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the
speaker settings, too..
• AUTO SETUP (Trinnov) Optimizer : To set the speaker setup and
speaker level automatically.
• Speaker Configuration : To adjust the speakers depending on
whether they are connected or not.
• Crossover Frequency : To select the desired crossover frequency.
• Speaker Distance: To select the distance between the listening
position and each speaker to set the delay time
automatically for optimum surround playback.
• Speaker Level Trim : To adjust speaker level or LFE level.
When selecting the Auto Setup Trinnov Optimizer
• Auto Setup Trinnov Optimizer lets you avoid troublesome listening-based speaker setup and achieve good surround. Auto
Setup Trinnov Optimizer has the feature that provides the optimum listening environment at up to three listening positions,
where you often sit depending on your tastes or program source, etc. You should connect the supplied microphone to the
Trinnov Mic connector so that this receiver can analyze the information from a series of test tones emitted from speakers at
listening position and can adjust the configuration, crossover frequency, distance, sound level and frequency response of
each speaker automatically.
• If you want to personalize your speaker setup and speaker level trim by making the settings manually, perform "When
selecting the Speaker Configuration" on page 64, "When selecting the Crossover Frequency" on page 65, "When selecting
the Speaker Distance" on page 66 and "When selecting the Speaker Level Trim" on page 67.
• After the Auto Setup Trinnov Optimizer has been completed, you can set the Trinnov settings as desired. (For details, refer to
"SETTING THE INPUT SETUP" on page 69.)
• Manufactured under license from Trinnov Audio. US and worldwide patents issued and pending. Trinnov is a trademark of
Trinnov Audio. This product contains one or more programs protected under international and U.S. copyright laws as
unpublished works. They are confidential and proprietary to Trinnov Audio. Their reproduction or disclosure, in whole or in
part, or the production of derivative works therefrom without the express permission of Trinnov Audio is prohibited. Copyright
2003-2008 Trinnov Audio. All rights reserved.
■Preparations
①. Check that the speakers are securely connected to this receiver.
• If your subwoofer has adjustable volume and crossover frequency, set the volume halfway and set the crossover frequency
to the maximum or the low pass filter off.
②. Connect the supplied microphone to the Trinnov Mic connector on the rear panel.(For details, refer to "CONNECTING
MICROPHONE" on page 14.)
■Notes :
• Because the microphone for Auto Setup is especially designed by Trinnov for use with this receiver, to use the auto setup
function, do not use a microphone other than the one supplied with this receiver.
• After you have completed the auto setup procedure, disconnect the microphone.
• If possible, use a tripod, etc. to attach the microphone at the same height as your ears would be when you are seated in your
listening position.
• Ensure there are no obstacles between the speakers and the microphone.
1. Place the microphone on a flat level surface at the listening position facing its "FRONT" side marked with the
red dot toward your AV system.
ENGLISH
AUTO SETUP Optimizer
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 61