Sherwood R-972 Stereo Receiver User Manual


 
48
ENGLISH
• When connecting a USB mass storage device to this unit, you can enjoy MP3 or WMA files stored on it through this receiver.
MP3
• MP3 files must have a “.mp3” or “.MP3” file name extension.
• It is recommended that you record your material at a 44.1kHz sampling rate, using the 96~320 kbps data transfer rate.
• Fixed bit-rate files are recommended. Variable bit-rate(VBR) files are playable, but playing time may be displayed
incorrectly.
WMA
• WMA files must have a “.wma” or “.WMA” file name extension.
• It is recommended that you record your material at a bit rate of 64 kbps or higher.
• This unit cannot play files recorded with a bit rate of 80 and 256 kbps.
Compatible USB mass storage device:
• USB flash memory(USB 2.0 or USB 1.1)
• USB flash players(USB 2.0 or USB 1.1)
• Memory cards(requires an additional card reader to work with this receiver)
Supported formats:
• USB or memory file format FAT 16 or FAT 32.
Notes :
• It is not possible to connect this unit to a PC for USB playback.
• We cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data that
may occur when connected to this unit.
• During USB playback, do not remove the USB device. Should this happen, it may be result in malfunction or cause damage to
this unit and/or the USB device. To prevent it, after USB playback, remove the USB device in the stop mode or the standby
mode.
2. Connect the USB device into the USB connector on the front panel.
Note :
• Depending on the file types, etc. it may take times to read
the files stored on the USB device.
Total number of files
1. Select the USB as an input source.
PLAYInG MUsIc FILes
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 48