Filter
Top Products
71
When selecting the Audio Mode
• You should select the audio input signal to be played.
■Notes :
• Be sure to set the Audio Mode to the audio input which is connected and assigned to the selected input source.
• When the HDMI Audio Output is set to On, no sound will be heard from the speakers connected to this receiver (except ROOM
2 speakers).
• When the HDMI Audio Output is set to On to play the audio signal on your TV, depending on the Audio Mode setting, this unit
can convert the corresponding audio signal to the PCM 2 channel signals and output them from the HDMI MONITOR OUT.
(For details, refer to "Audio conversion" on page 8.)
• When the Audio Mode is set to HDMI, you should connect the HDMI INs and set the HDMI Assign correctly. If not, the "HDMI"
indicator flickers on the unit's display and no sound will be heard.
• When the Audio Mode is set to Digital, you should connect the DIGITAL INs and set the Audio Assign correctly. If not, the
"DIG." indicator flickers on the unit's display and no sound will be heard.
• When the Audio Mode is set to HDMI, you should set the Video Mode to HDMI, too. If not, no sound will be heard.
→ Auto : When there are multiple audio input signals, the audio input signals are detected and the audio input signal to be
↕ played is selected automatically in the priority order of them :
HDMI audio > Digital audio > Analog audio
HDMI : The signal that is input into the HDMI IN is always played.
↕
Digital : The signal that is input into the OPTICAL or the COAXIAL DIGITAL IN is always played.
↕
→ Analog : The signal that is input into the analog AUDIO INs is always played.
Continued
• Depending on how to select a surround mode, you can select the auto surround mode or the manual surround mode.
Off : You can select the desired of different surround modes selectable for the signal being input with
(Manual surround mode) using the MULTI CONTROL knob or the SURROUND MODE UP/DOWN ( >/< ) buttons.
(For details, refer to "When selecting the manual surround mode with pressing the SURROUND
MODE button on the front panel" on page 39.)
On : The optimum surround mode will be automatically selected depending on the signal format being input.
(Auto surround mode)
■Notes :
• Even when the auto surround mode is selected and the same type of digital signal format is being input, the optimum
surround mode may vary depending on whether the speaker is set to "No" or not.
• When the auto surround mode is selected, the surround modes other than the optimum surround mode cannot be selected.
When selecting the Auto Surround
• The remastering processes the input signal digitally and converts its digital sampling frequency to twice the current frequency
(88.2/96 kHz or 176.4/192 kHz) for a more detailed sound reproduction.
Off : To turn off the remastering function ("RE-MASTERING" goes off).
↕
On : To turn it on ("RE-MASTERING" lights up)
■Notes :
• The remastering function has an effect on the digital input signal from only the 88.2/96 kHz PCM (2 channel) source or lower.
• When the remastering function is activated, the stereo mode is automatically selected.
When selecting the Audio Remaster
ENGLISH
↕
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 71