Filter
Top Products
ENGLISH
63
ENGLISH
5. Press the CURSOR UP(▲)/DOWN(▼) buttons to select "COMPUTATION START", then press the ENTER
button.
6. To finish the Auto Setup Trinnov Optimizer, press the CURSOR UP(▲)/DOWN(▼) buttons to select
"FINISH ~" at the next results, then press the ENTER button.
• If a series of computation procedure has been completed,
the results are displayed.
• To check the next or the previous results, press the
CURSOR UP(▲)/DOWN(▼) buttons to select "NEXT" or
"PREVIOUS", then press the ENTER button.
• To stop the computation procedure while performing it,
turn the power off, then results cannot be memorized.
■Note:
• Depending on the number of speakers to be calibrated, it
may take up to 15 minutes to complete the computation
precedure.
• Then the power is turned off and the results are memorized into the memory of the current listening position.
7. To perform the Auto Setup Trinnov Optimizer at other listening position, repeat the above the steps 1 ~ 6.
When the computation has been completed.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 63