Filter
Top Products
73
On : To compensate for edgy or shrill movie sound tracks. ("CINEMA-EQ" lights up.)
↕
Off: To turn off the cinema EQ function. ("CINEMA-EQ" goes off.)
When selecting the Cinema EQ
• You can select the desired of different spatial modes, which correspond to different levels of "spatial" correction.
→ None : No remapping is applied.
↕
DLY + LVL (Delay + Level) : The distance and speaker levels are compensated so that all speakers seem to be the same
↕ distance from the lisetener and all speakers seem to be the same level.
Autoroute : Each input channel is routed to the nearest speaker, according to the input stream format and to the ITU
↕ standards.
2D Remap : No elevation compensation is done, the remapping calculation takes into account the coordinates of the
↕ speakers in the horizontal plane only.
→ 3D Remap : The remapping matrix is computed according to all Trinnov criteria in order to produce the best spatial
correction.
When selecting the Trinnov Spatial Mode
• Depending on the selected mode, the remapping matrix will be different as follows.
Cinema : The front speakers are supposed to be +22.5˚ and - 22.5˚ from the center speaker.
↕
Music : They are supposed to be +30˚ and -30˚.
When selecting the Trinnov Remapping
When selecting the Name
Continued
ENGLISH
1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select "Name", then press the ENTER button.
• You can give names to the input sources other than tuner.
• Up to 7 characters can be entered for each name.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 73