Filter
Top Products
106
(Contd. on the next page)
DJS Ver. 1.600
9
Changing the Settings to Make DJS More Convenient Ripping Settings
ContentsIndex
9-6-3
Dead Air Cut Settings
Select the settings (3) shown in the Ripping function.
1
Set the number of seconds for the [Dead Air Cut]
by clicking [C] or [D].
• Set how far (1-99 seconds) before the point detected as
dead air at the end of a song to start.
9-6-4
Settings for Selecting the DVD/CD
Drive & Acquiring Song Information
This changes the CD drive to be used when importing songs from a
music CD. In addition, this changes the settings for importing song
information via the Internet (Auto Access ON/OFF, Site(s) to Access,
Proxy Servers).
1
Click [About CD-DA].
• The [DVD/CD Drive] and [CD Information] setting
screens open.
2
Click the DVD/ or CD drive you wish to use.
• The [DVD/CD Drives] that can be used are displayed in a
list.
• The currently selected DVD/CD drive is displayed in
orange.
• When the selected DVD/CD drive does not support the
CD-TEXT format, click the [Read CD-TEXT] check box,
and change the setting to OFF.
Default Settings when
Installed
At installation the following settings are
made.
(Units: Sec.) [10] [30] [60]
Warning!
Setting the DVD/CD drive
To select a DVD/CD drive, you must
log on from an account that has
administrator privileges. Select the
DVD/CD drive after logging on with a
user that is set as the computer
administrator.
Read CD-TEXT
CD-TEXT is a standard that allows
album and track information to be
embedded on a music CD. You can rip
music with a common CD drive, but in
order to import text information, a CD
drive which supports CD-TEXT is
necessary.
→ ‘Importing Songs from Music CDs’
P.83