Pioneer AVIC-U310BT Stereo Receiver User Manual


 
Operating by hardware
buttons
Pressing BAND/ESC button
Band can be selected from among XM 1,
XM 2,orXM 3. This is useful for switching the
preset item.
Pressing MULTI-CONTROL up or down
During Channel mode:
You can recall radio stations assigned to pre-
set tuning keys
to .
During Category mode:
The categories move up or down one at a time.
Pressing MULTI-CONTROL left or right
During Channel mode:
The channels move up or down one at a time.
During Category mode:
The channels move up or down one at a time
within a selected category.
Pressing and holding MULTI-CONTROL
left or right
During Channel mode:
You can skip the broadcasting channels.
During Category mode:
You can skip the broadcasting channels within
a selected category.
Pressing the center of MULTI-CONTROL
The function select screen appears.
Storing and recalling
broadcast stations
With a touch of any of the preset tuning keys
(
to ), you can easily store up to six broad-
cast channels for later recall (also with the
touch of a key).
1 Select the channel that you want to
store in memory.
2 Keep touching a preset tuning key
to until the XM preset number (e.g.,
P.CH1) stops flashing.
The selected station has been stored in mem-
or y.
p Up to 18 stations, 6 for each of three XM
bands can be stored in memory.
3 Touch the same preset tuning key to
.
The stations are recalled from memory.
p You can also press MULTI-CONTROL up or
down to recall radio stations assigned to
preset tuning keys
to .
Switching the XM channel
select mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
% Touch
repeatedly to set the desired
channel select mode.
It changes the settings as follows:
! : Channel mode
You can select a channel from all channels
when you operate this function.
!
: Category mode
You can select a channel within a selected
category that youoperate this function.
Using the XM tuner
En
95
Chapter
21
Using the XM tuner