Pioneer AVIC-U310BT Stereo Receiver User Manual


 
Stopping Bluetooth wave
transmission
You can stop transmission of electric waves by
turning off the Bluetooth function. If you do
not use the Bluetooth wireless technology, we
recommend selecting [Off].
1 Touch [Settings] on the Phone Menu
screen.
The Bluetooth Settingsscreen appears.
2 Touch [Bluetooth On/Off].
Touching [Bluetooth On/Off] switching be-
tween [On] and [Off].
Answering a call automatically
The navigation system automatically answers
incoming calls to the cellular phone, so you
can answer a call while driving without taking
your hands off the steering wheel.
1 Touch [Settings] on the Phone Menu
screen.
The Bluetooth Settingsscreen appears.
2 Touch [Auto Answer Preference].
The Auto Answer Preferencescreen ap-
pears.
3 Touch the desired option.
! [Off]: No automatic response. Respond
manually
! [Immediately]: Answers immediately
! [After 3 seconds]: Answers after three sec-
onds
! [After 6 seconds]: Answers after six sec-
onds
! [After 10 seconds]: Answers after ten sec-
onds
Setting the automatic rejection
function
If this function is on, the navigation system
automatically rejects all incoming calls.
1 Touch [Settings] on the Phone Menu
screen.
The Bluetooth Settingsscreen appears.
2 Touch [Refuse All Calls].
Touching [Refuse All Calls] switches between
[On] and [Off].
p If both Refuse All Callsand Auto An-
swer Preferenceare activated, Refuse
All Callsis prioritized and all incoming
calls are automatically rejected.
p If Refuse All Callsis set to [On], rejected
incoming calls will not be stored in the
missed call list.
Echo canceling and noise reduction
When you are operating hands-free phoning
in the vehicle, you may hear an undesirable
echo. This function reduces the echo and
noise while you are using hands-free phoning,
and maintains a certain sound quality.
1 Touch [Settings] on the Phone Menu
screen.
The Bluetooth Settingsscreen appears.
2 Touch [Echo Cancel].
Touching [Echo Cancel] switches between
[On] and [Off].
Setting automatic connection
When automatic connection is active, the na-
vigation system will automatically establish a
connection with a registered phone when it
comes into range. Using this feature avoids all
of the processes for establishing a connec-
tion.
p With some cellular phones, it may not be
possible to perform automatic connection.
Using hands-free phoning
En
56
Chapter
10