Filter
Top Products
Pressing and holding MULTI-CONTROL
left or right
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
p You can cancel seek tuning by pressing
MULTI-CONTROL left or right.
Pressing the center of MULTI-CONTROL
The function select screen appears.
Storing and recalling
broadcast frequencies
With a touch of any of the preset tuning keys
(
to ), you can easily store up to six broad-
cast frequencies for later recall (also with the
touch of a key).
1 When you find a frequency that you
want to store in memory, keep touching a
preset tuning key
to until the preset
number (e.g., P.CH1) stops flashing.
The selected radio station has been stored in
memory.
2 Touch the same preset tuning key
to
.
The radio station frequencies are recalled from
memory.
Storing the strongest
broadcast frequencies
“BSM” (best stations memor y) lets you auto -
matically store the six strongest broadcast fre-
quencies under the preset tuning keys
to
and, once stored there, you can tune in to
these frequencies with the touch of a key.
1 Display the “Function Menu” screen.
= For details, refer to Screen switching over-
view on page 70.
2 Turn MULTI-CONTROL to display
“BSM”.
3 Press the center of MULTI-CONTROL to
start “BSM”.
BSM begins to flash. While BSM is flashing,
the six strongest broadcast frequencies will be
stored under the preset tuning keys
to in
order of their signal strength. When this is
complete, BSM stops flashing.
p Tocancel the storageprocess, press the
center of MULTI-CONTROL again.
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved by using
to .
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1 Display the “Function Menu” screen.
= For details, refer to Screen switching over-
view on page 70.
2 Turn MULTI-CONTROL to display
“Local”.
3 Pressing the center of MULTI-CONTROL
switches betwe en on and off.
4 Press MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: Level1 — Level2 — Level3 — Level4
AM: Level1 — Level2
p The FM “4” (AM “2”) setting allows recep-
tion of only the strongest stations, while
lower settings let you receive weaker
stations.
Switching the seek mode
You can select the method of seek tuning.
1 Display the “Function Menu” screen.
= For details, refer to Screen switching over-
view on page 70.
Using the HD Radio (Digital Radio)
En
77
Chapter
16
Using the HD Radio (Digital Radio)