Filter
Top Products
99
A4.6Ci SYSTEM ACCESSORIES
IRC-2P MicroFlasher
™
STOCK #
FG00726
• Transparent to infrared light.
• IRC-2P required for each component you wish to
control.
• Includes IR blocking cover for IR routing/zoning
applications.
• Miniature size for discrete placement.
• Adhesive-backing for quick and easy placement.
• Includes 10' of wire with 3.5mm mono mini-plug.
• Dimensions: 5/16" wide x 11/16" high x 3/16"deep.
• Approximate shipping weight: 1 lb.
IRC-1P FloodFlasher
™
STOCK #
FG00932
• High-output IR flasher capable of controlling an entire
rack of equipment. Connects with a 3.5mm mono mini-
plug; 10’ cable.
IntelliPad
®
Ci Adapter Cable
STOCK #
FG00852
• Allows for easy connection of Niles IR Sensors (that
have been installed with two-conductor shielded cable)
to IntelliPad
®
Ci Master Keypad Modules.
• Utilizes a three-position set-screw connector on one
end for connection of a two-conductor shielded cable.
Utilizes a high-quality male RJ-45 connector on the
other end that quickly connects to an IntelliPad
®
Ci
Master Keypad Module.
IR Sensors and IR Flashers
TIR1+ IR Sensor
STOCK #
FG00649
•
Includes Niles’ award-winning power-status display
technology. Its bi-color LED tells you if your remotely
located A/V system is On.
•
Bi-color flashback LED confirms the reception of an IR
command or possible IR interference.
•
Sensor pick-up range: 25-30'
•
Small size enables you to locate unit anywhere.
•
Removable connector simplifies installation.
•
Dimensions: 3-1/8" wide x 1-5/16" high x 2-7/8" deep.
•
Approximate shipping weight: 1 lb.
MS-1 IR MicroSensor
™
STOCK #
FG00518
• Flashback LED confirms the reception of an IR com-
mand or possible IR interference.
• Sensor pick-up range: 25-30'
• Miniature size makes it virtually invisible.
• Circuit board’s Surface-Mount Technology (SMT)
assures high reliability.
• Includes a 6' hook-up wire.
• Overall dimensions: 3/4" dia. x 2-3/8" deep.
• Bezel dimensions: 3/4" dia. x 1/4" deep.
• Approximate shipping weight: 1 lb.
MS-2 IR MicroSensor
™
ColorStock#
White FG00627
Black FG00614
• Flashback LED confirms the reception of an IR com-
mand or possible IR interference.
• Sensor pick-up range: 25-30 ft.
• Miniature size makes it virtually invisible.
• Adhesive backing for quick and easy mounting.
• Circuit board’s Surface-Mount Technology (SMT)
assures high reliability.
• Includes a 6' hook-up wire.
• Dimensions: 2" wide x 1/2" high x 1/4" deep.
• Approximate shipping weight: 1 lb.
MS-360 Omni-Directional Ceiling-Mount IR Sensor
STOCK #
FG00765
• 1-1/2” frosted dome covers sensing diodes.
• Sensor pick-up 360°, range: 28-45'
• Optical filters for full sunlight and half sunlight.
• All under-dome parts pre-painted white.
• Improved shielding for electromagnetic and RF
interference.
• Mounts in a 1/2" hole with two self-drilling screws.
• Overall dimensions: 1-1/2" diameter x 3-5/8" deep.
• Lens dimensions: 1-1/2" diameter x 1/4" deep.
• Approximate shipping weight: 1 lb.
IRR4D+ Wall-Mount IR Sensor
ColorStock#
Almond FG00640
Bone FG00642
White FG00643
• Bi-color LED tells if remotely located A/V system is on.
• Bi-color flashback LED confirms the reception of an IR
command or possible IR interference.
• Sensor pick-up range: 25-30'
• Removable Decora-style insert for easy color changes.
• Requires 1-gang P-ring or electrical box at least 2-3/4"
deep.
• Dimensions: 2-3/4" wide x 4-1/2" high (includes face-
plate), depth behind plate: 2-5/8".
• Approximate shipping weight: 1 lb.