Filter
Top Products
86
PROGRAMMING STEPS
After you choose a delay, all Master Keys turn off.
The KEY LED turns OFF, and the PAGE LED blinks RED.
Step 7 - To add another delay, press the DELAY button again, and repeat the previous step. (For example, you can have
two consecutive one-second delays.)
Step 8 - Repeat steps 3 through 7 until you have programmed all the steps in the Function-Key Sequence.
Step 9 - Press the PROGRAM button to program a sequence for a different Function Key within the same Master Key Page.
The TRIGGER LED turns on RED, the PAGE LED turns off, and the KEY LED blinks RED.
Step 6 - Choose the Master Key for the desired delay time. Refer to the table below:
DELAY TABLE
KEY
Master Key 1
DELAY TIME
.5 seconds
Master Key 2 1 seconds
Master Key 3 4 seconds
Master Key 4 8 seconds
For example, if you press Master Key 2,
a one-second delay is added to the sequence.