Filter
Top Products
83
PROGRAMMING STEPS
Step 11 - Repeat steps 2 through 10 until all Zone On/Off or System On/Off sequences have been programmed.
Note: If you missed IR commands in a sequence, re-do the programming for the whole sequence. Whatever was previously
programmed is automatically replaced.
Step 12 - Press NEXT to continue programming.
The FUNCTION KEY IR/FUNCT. KEY SEQ. LED is on GREEN, the TRIGGER LED is on RED, and the PAGE LED is blinking RED.
FUNCTION-KEY SEQUENCE
Step 1 - Press a Master Key to identify the Master Key Page where the Function Key that triggers the sequence is located.
The TRIGGER LED remains ON, the PAGE LED turns OFF, and the KEY LED blinks RED.
Select
™
Transport
™
Numeric
™
To choose the Default Page,
tap the OFF Key. Master Keys 1
and 3 illuminate.