Filter
Top Products
43
CONNECTIONS
CONNECTING AN IR SENSOR FOR LOCAL SYSTEM CONTROL
IR Sensors installed in zones for hand-held IR remote control of the A4.6Ci and its connected source compo-
nents can also be used to control local components (i.e., a TV, DSS, DVD, and a surround-sound system locat-
ed in the master bedroom zone as shown in Figure 38).
The IR sensor connects normally to the Solo
™
and Select
™
Master Keypad to control the A4.6Ci and its con-
nected source components. In addition, the IR sensor connects to a local IR repeating system (DATA and GND
connections only) to provide control of local components.
TV
Four-Pair Twisted Cable
LR
AUDIO VIDEO
DSS
PHONE
DIGITAL
LR
AUDIO VIDEO
DVD
RECEIVER
DIGITAL
LR
AUDIO
CD
DVD
Video 3
Video 2
Video 1
VIDEO
FRONT
L
L
R
DIGITAL
1
2
R
CENTER
REAR
L
R
12V
D.C.
Niles IRP-6+
(provided for IR control
of local equipment)
Zone 6 – Master Bedroom
Distributed Equipment Location
Plugged into
Switched AC outlet
Niles
IRR-4D+
IR Sensor
Solo
Master
Keypad Module
RJ-45 Connector
for connection to
Numeric Accessory
Keypad Module
RJ-45 Connector
for connection to
Master Keypad
Module
RJ-45 Connector
for connection to
IR Sensors
Two-Conductor Shielded Cable
(connect DATA and GND only)
Two-Conductor
Shielded Cable
Three-Wire to
RJ-45 Adapter
RJ-45 Connector for
connection to
the A4.6Ci
Included
Jumper Cable
IR SENSOR
INPUT
OUTPUT
SYSTEM
ACCESSORY
KEYPADS
Figure 38