Filter
Top Products
81
PROGRAMMING STEPS
Step 5 - Select the page where the next IR command is stored to continue the Zone On/Off or System On/Off sequence
you are programming. (You can press a Master Key, tap the Off Key for the Default page, or press and hold the Off Key
for the Library page).
The PAGE LED turns OFF, and the KEY LED blinks RED.
Select
™
Transport
™
Numeric
™
Step 6 - To insert delays, press the DELAY button instead of a Master Key,
while the PAGE LED is blinking RED.
The PAGE LED turns off, the KEY LED blinks RED and the first four keys on the Master Key module illuminate.
Step 7 - Choose the Master Key for the desired delay time. Refer to the table below:
DELAY TABLE
KEY
Master Key 1
DELAY TIME
.5 seconds
Master Key 2 1 seconds
Master Key 3 4 seconds
Master Key 4 8 seconds
For example, if you press Master Key 2,
a one-second delay is added to the sequence.