Filter
Top Products
70
The PAGE LED turns off, and the ENTER IR LED turns on GREEN.
PROGRAMMING STEPS
The ENTER IR LED turns on RED to indicate it is
ready to receive the OFF command.
Step 3 - Press the appropriate power
or ON button on the original
factory remote.
Step 4 - Press the OFF button on the original factory remote if the component has discrete ON and OFF commands.
The ENTER IR LED turns OFF, and the PAGE LED
blinks RED.
Or press the PROGRAM button if the component has one power command for both ON and OFF.
The ENTER IR LED turns off, and the PAGE LED blinks RED.