Filter
Top Products
100
A4.6Ci SYSTEM ACCESSORIES
AC-3 Voltage-Triggered AC Power Strip
STOCK #
FG00242
AC power strip with two voltage-triggered AC outlets and
one unswitched AC Outlet.
12V DC/200mA Wall Adapter
STOCK #
FG00665
Provides a 12V DC sync signal to the IntelliControl
®
when
plugged into a component’s switched outlet.
OTI-512 Opto-Isolated Voltage Trigger
STOCK #
FG00319
Converts any voltage between 3V and 30V (AC or DC) to
12V DC sync. Useful in combination with an accessory
cable with Proceed
™
, Fosgate
™
, Citation
™
, and Synthesis
™
preamps.
10’ Mini-plug to Mini-Plug Accessory Cable
STOCK #
FG00933
• 10' 3.5mm mono mini to 3.5mm mono mini-cable.
• Used to send sync signals to the 12V sync inputs of
the IntelliControl
®
. Connects with a 3.5mm mono mini-
plug to 3.5mm.
Sync Accessories
Many of the components in your system should have their power status “synced” to the A4.6Ci. The following
accessories either sense that a component is on/off or actually turn the component(s) on/off.
APC-2 Current-Sensing Outlet Switcher
STOCK #
FG00254
Current sensing outlet. Provides 12V DC sync connection
via an accessory cable to the IntelliControl
®
.
IPC-6 Programmable AC Power Controller
LS-1 Light Sensor
SENSITIVITY
ADJUST
12V CONTROL
OUTPUT
SENSOR
LS-1 Light Sensor
MAXMIN
+12V DC
®
P
O
W
E
R
STOCK #
FG00272
STOCK #
FG00728
Six-outlet microprocessor controlled power management
system with on/off sequencing.
*Rack-mount panel available. Stock#FG00669
Senses the brightness of a component’s front-panel dis-
play and outputs a 12V DC sync signal when the display
is brightest.
10’ Bare Wire to Mini-Plug Accessory Cable
STOCK #
FG00724
• 10' bare wire to 3.5mm mono mini-cable.
• Used to send sync signals to the 12V sync inputs of
the IntelliControl
®
. Connects with a 3.5mm mono mini-
plug to 3.5mm.