Filter
Top Products
75
PROGRAMMING STEPS
Step 7 - Press the PROGRAM button to select a different Master Key Page.
The KEY LED turns OFF, and the PAGE LED blinks RED.
Step 8 - Repeat steps 1 through 7 until all the necessary IR commands have been stored, and all Function Keys have been
programmed for all the Master Key Pages.
When all the necessary Function-Key IR commands have been programmed, press NEXT to continue programming.
The POWER/MASTER KEY SEQ. LED turns ON GREEN, the TRIGGER LED turns ON RED,
and the PAGE LED blinks RED.
MASTER KEY SEQUENCE
Step 1 - Press a Master Key to program the Master Key Sequence.
The TRIGGER LED turns OFF, and the PAGE continues to blink RED.
Select
™
Transport
™
Numeric
™