Filter
Top Products
68
Define the Brand of Your Device
Note:
In case, your brand is not displayed in the list of brands, Try Search
mode. See “Defining brands by searching” on page 69.
5. Select your brand from the list.
The selected brand will be highlighted. The Search button
switches into Next.
6. Tap Next.
When your brand uses only one set of RC codes, the remote
controller switches to Try mode. Go to step 9.
When there are several code sets for your brand, the following
screen appears.
If you selected CD player, DVD player or CD recorder, select
Onkyo or Onkyo-x other than Onkyo-1 from the brand list. If
you selected MD player, select Onkyo-5.
Notes:
• The code sets are ranked. The first code set in the list is used
for most devices of the selected brand.
• When you do not know which code set to select from the list,
you can use Search mode. See “Defining brands by
searching” on page 69.
7. Select a code set from the list.
The selected code set will be highlighted. The Search button
switches to Next.
8. Tap Next.
The remote controller switches to Try mode. The first control
panel of the selected device is displayed.
9. Try the buttons on the different control panels and
check if the device is responding to the RC codes the
remote controller is sending.
Note:
However, your device is responding to the current code set, it is
recommended to try other code sets. When your device responds
to more than one code set, install the most suitable one.
10.If you are not satisfied with the way the device is
responding to the selected code set, tab Back to select
another code set.
or
When you are satisfied with the selected code set, tap
Install.
When the RC codes for your devices are installed, the remote
controller beeps and returns to Use mode. Your brand is now
defined for the selected device.
11. Define all other devices in the Home menu you want to
operate.