Filter
Top Products
52
2-6. Listening Mode Preset Sub-menu
With the DTR-8.3, you can set a different listening mode for each
different signal type that comes from each input source. For
example, if your DVD player also plays compact discs and the DVD
video signal is Dolby Digital and the compact disc signal is PCM,
then you can set a different listening mode for each.
This is especially convenient if you frequently play the same types of
movies or music.
* The 5.1-channel digital surround format has a variety of versions
including Dolby Digital and DTS. The 5.1- channel digital
surround format enables the individual recording and playing of
five full-range (20 Hz to 20 kHz) channels (left and right front,
center, and two surround channels) plus an LFE channel (Low
Frequency Effect) for the low-range effect sound. It will create a
realistic sound that can be heard in the theaters and concert halls.
2-7. 12V Trigger Setup sub-menu
This sub-menu allows you to make the required settings to turn on
the output from the 12V TRIGGER terminal to control another
component or device with the DTR-8.3 for each input source.
a. Trigger A
On: Select to activate the device connected to the 12V
TRIGGER A terminal when the input source is selected.
Off: Select when no device is connected to the 12V TRIGGER
A terminal or you do not want the connected device to activate.
b. Trigger B
On: Select to activate the device connected to the 12V
TRIGGER B terminal when the input source is selected.
Off: Select when no device is connected to the 12V TRIGGER B
terminal or you do not want the connected device to activate.
Advanced Menu
2.Input Setup
2-6.ListeningMode Preset
a.Analog/PCM
:Stereo
b.PCM fs=96k :Stereo
c.Dolby D :Dolby D
d.DTS :DTS
e.D.F.2ch
:PLII
f.D.F.Mono:Mono
Quit:|SETUP|
Input:DVD
Input:DVD
Once 10 characters are entered, you will automatically return to the
previous screen. If the name is completed before you enter 10
characters, enter spaces until 10 characters are entered.
To change an existing character, move the cursor backward with the
RETURN button or forward with the ENTER button to the location
of the mistaken character and then enter the desired character as
explained above. To erase a character, enter a blank space in its
place. After you have completed the name, press the ENTER button
until you return to the Character Input Sub-menu.
2-5. IntelliVolume Sub-menu
This sub-menu allows you to adjust for the volume differences
between your various input source components.
a. IntelliVolume
When switching input sources, you may find that the output level for
different components or input sources connected to the DTR-8.3 is
different even though the main volume setting is the same. Under
normal circumstances, you would then have to change the volume
setting each time you change the input source. This Intelli Volume
setting allows you to preset a volume level for each input source
separately so that when you do switch from one input source to
another, the DTR-8.3 adjusts the volume accordingly and the
volume stays the same. To set the Intelli Volume, simply select an
input source at the front panel, and if that source is quieter than other
sources, increase its decibel level with the
cursor button, or if it is
louder than other sources, decrease its decibel level with the
cursor
button.
The Intelli Volume can be adjusted between –12 and +12 decibels.
Advanced Menu
2.Input Setup
2-5.IntelliVolume Setup
a.IntelliVolume
: 0dB
Quit:|SETUP|
Input:DVD
Input:DVD
Input Setup
Advanced Menu
2.Input Setup
2-7.12V Trigger Setup
a.Trigger A :On
b.Trigger B :Off
Quit:|SETUP|
Input:DVD
Input:DVD