Filter
Top Products
31
Adjusting the main volume adjusts the volume level of all the
speakers connected to the DTR-8.3 together. If headphones are
connected, this also adjusts the volume heard from the
headphone speakers. To adjust the volume, either press the VOL
buttons on the remote controller or turn the MASTER
VOLUME dial. To increase the volume, turn the dial clockwise;
to decrease the volume, turn the dial counterclockwise. The
volume can be set to 0 to 100 (or –∞, –81 to +18 dB).
Though the DTR-8.3 is often used to listen to the radio, it does not
show you its true ability until it is used to play music or watch
videos, DVDs, and the like. The DTR-8.3 has the latest and most
state-of-the-art features to play back today’s technologies with the
utmost in fidelity and power. From a two-speaker system to a seven-
speaker system, you are assured a sound space that you can always
enjoy.
To ensure the proper sound space, you must first perform the
speaker setup settings. These settings allow you to set the type of
speakers you are using, the distance that they are located from the
listening position, and the individual speaker volumes. For more
details, see Speaker Setup Sub-menu of the Setup Menu on page 46.
When using the remote controller, select AV Amp in the Home
menu to display the operation menu.
Basic operation
If you want to perform these operations using the remote controller,
first press the RCVR button.
1. Press the input source button that corresponds to the
source to which you want to listen.
2. Turn on the corresponding component and play the
media.
3. Adjust the volume.
+
–
CH
VOL
MUTE
CONT
+
–
LIGHT
L
Master Volume
VOL
Enjoying music or videos with the DTR-8.3
Input Selector
buttons
Input source buttons
DTR-8.3
Remote controller
DTR-8.3 Remote controller
Master Volume
VOL