Integra DTR-6.4/5.4 Stereo Receiver User Manual


 
59
Audio Adjust
--
/
---
123
456
+
10 0
789
Audio Sel
Muting
Angle
Subtitle
TV
/
VCR
Random
Audio Adjust
Enter
Search
Input Selector
Dimmer
Zone 2
Display
SURR
THX
StereoDirect
All ST
C
H
Disc
Pure A
Rec
DSP DSP Re
-
EQ
Level
AM
V
1
DVD
V
3
V
4
V
5
C
D
V
2
P
H
TAP TUN
RC
-
534M
VOL
Audio Adjust
///
Audio Adjust
///
These settings are enabled depending on the listening mode or input
signal. Select the listening mode for which you make the Audio
Adjust settings before performing the procedures.
Setup Procedure
1. Press the Audio Adjust button.
The Audio Adjust settings appear in the front display and on the
monitor.
Note:
The items that appear in the menu depend on the currently selected
listening mode or the input signal.
2. Use the and cursor buttons to select the item that
you want to set.
3. Use the and cursor buttons to set the value.
See table on the right for the settings and available values
(mode).
4. Press the Audio Adjust button.
This completes the setting and the menu display disappears.
Bass : 0dB
Treble : 0dB
* DTR-6.4 only
Bass
Separately adjust the bass setting in 2-step increments.
The Bass adjustment is only enabled for the front left and right
speakers.
Treble
Separately adjust the treble setting in 2-step increments.
The Treble adjustment is only enabled for the front left and right
speakers.
Setting Values Initial value
Bass –12 to +12 0
Treble –12 to +12 0
LFE Level* , –10 to 0 db 0 dB
Double Bass On, Off On
Late Night Off, Low, High Off
Center Image 0, 1, 2, 3, 4, 5 3
Panorama On, Off Off
Dimension 0, 1, 2, 3, 4, 5, 6 3
Center Width 0, 1, 2, 3, 4, 5, 6, 7 3
Front Effect On/Off On
Reverb Level Low/Middle/High Middle
Reverb Time Short/Middle/Long Middle
Input Channel L+R/Left/Right L+R
Academy Filter* On/Off Off
Listening Angle 20°/40° 40°
Center On/Off Off
Front Expander On/Off Off
Dialog Enhance On/Off Off
Virtual Surround
Level
–3 to +3 0
Settings available when the listening mode is
other than “Direct” (for DTR-5.4) or other than
“Direct,” “Pure Audio” and “THX” (for DTR-6.4)