Filter
Top Products
46
Listening Modes
--
/
---
123
456
+
10 0
789
Audio Sel
Muting
Angle
Subtitle
TV
/
VCR
Random
Audio Adjust
Enter
Search
Input Selector
Dimmer
Zone 2
Display
VOL
C
H
Disc
Rec
Level
Re
-
EQ
StereoDirect
All ST
Pure A
DSP DSP
SURR
THX
AM
V
1
DVD
V
3
V
4
V
5
C
D
V
2
P
H
TAP TUN
RC
-
534M
Re-EQ
RCVR
Mode
Listening mode buttons
Listening mode
buttons
• Refer to pages 44 and 45 for more details of listening modes.
• Refer to page 45 for sources and listening modes.
• When playing Dolby Digital or DTS software, the listening
mode will automatically change to Dolby Digital or DTS.
Tip:
You can set in advance a different listening mode for each input
source. For more details, see page 57.
When using the remote controller, first press the RCVR
Mode button before preceding to the step below.
Press one of the listening mode buttons to select the listening mode.
Direct/Pure Audio (Direct, Pure A): Changes the listening mode
for the signal type that is currently being input from the selected
input source to the Direct listening mode. If pressed, the
corresponding settings in the “Input Setup” menu for the selected
input source is also changed. When the listening mode is set to
Direct, you can switch between Direct and Pure Audio. When you
select Pure Audio, the video signal is interrupted (the front panel
display and OSD will be blacked out), and the PURE AUDIO
indicator lights up.
When you are using the remote Zone (Zone 2), the Pure Audio
setting will not work.
Note:
For Australian models, the monitor video coming from the
COMPONENT VIDEO terminals cannot be turned off.
Stereo: Changes the listening mode for the signal type that is
currently being input from the selected input source to the Stereo
listening mode. If pressed, the corresponding settings in the “Input
Setup” menu for the selected input source is also changed (see page
57).
Selecting a listening mode (DTR-6.4)
123
456
789
SURR
THX
Stereo
Direct
All ST
Pure A
DSP DSP Re
-
EQ
DTR-6.4
Remote controller
Surround (SURR): Changes the listening mode for the signal type
that is currently being input from the selected input source to the
surround mode that matches the signal type (e.g., Dolby Pro Logic
II, Dolby Digital, DTS, or DTS Neo:6). If pressed, the
corresponding settings in the “Input Setup” menu for the selected
input source is also changed (see page 57).
THX: Changes the listening mode to the THX listening mode.
Be aware that if surround back speakers are not connected, or if the
Surr Back/Zone 2 setting of the Surr Back/Zone 2 Sub-menu is set
to “Zone 2,” the THX Surround EX, DTS-ES Discrete 6.1, or DTS-
ES Matrix 6.1 listening modes cannot be selected.
All ST (remote controller only): Changes the listening mode for
the signal type that is currently being input from the selected input
source to the All Ch Stereo listening mode. If pressed, the
corresponding settings in the “Input Setup” menu for the selected
input source is also changed (see page 57).
DSP: Changes the listening mode for the signal type that is
currently being input from the selected input source as shown
below.
Orchestra → Unplugged → Studio-Mix → TV Logic → All Ch
Stereo → Mono → T-D → Mono Movie → Enhanced → Orchestra.
If pressed, the corresponding settings in the “Input Setup” menu for
the selected input source is also changed (see page 57).
Each press of the DSP button on the remote controller switches
the listening modes just like the DSP button on the DTR-6.4.
On the other hand, each press of the DSP button switches the
listening modes in reverse order.
Re-EQ (re-equalization) takes the edginess or “brightness” out of
your home cinema sound to compensate for the fact that sound
mixed for theaters may sound too bright when played back through
speakers in the home environment.
This can be set to either “On” or “Off.”
This function only works in the THX, Dolby Digital, Dolby Digital
EX, Dolby Pro Logic II Movie, DTS, DTS-ES Discrete 6.1, DTS-
ES Matrix 6.1, DTS Neo:6 Cinema, All Ch Stereo, Mono listening
modes.
Note:
Dolby Pro Logic II Movie, DTS Neo:6 Cinema, Dolby Digital, and
DTS are only enabled for multichannel playback.
Re-EQ function for movies (DTR-6.4 only)
DTR-6.4