Filter
Top Products
33
Selecting the appropriate setting for your connection
To create the optimum sound space for both visual and audio
pleasure, it is necessary to set which type and size of speakers you
will use. Once made, you will not need to change these settings
unless you change the speaker configuration.
For your reference to speaker size settings, if the diameter of your
speaker unit is larger than 6-1/2" (16 cm), use the “Large” setting;
otherwise use the “Small” setting.
1. Display the main menu.
Press the Setup button on the front panel or Setup button on the
remote controller to display the main menu on the monitor and
front display.
2. Use the and cursor buttons to select “2. Speaker
Config” and then press the ENTER button.
The speaker configuration menu appears.
3. Use the and cursor buttons to select “Subwoofer”
and then use the and cursor buttons to select the
subwoofer setting.
Yes: Select when a subwoofer is connected.
No: Select when a subwoofer is not connected.
4. Use the and cursor buttons to select “Front L/R”
and then use the and cursor buttons to select the
front speaker setting.
Large: Select if the front speakers are large sized.
Small: Select if the front speakers are small sized.
• If “No” is selected for the Subwoofer setting, this setting is
fixed to “Large.”
5. Use the and cursor buttons to select “Center”
and then use the and cursor buttons to select the
center speaker setting.
None: Select if no center speaker is connected.
Large: Select if the center speaker is large sized.
Small: Select if the center speaker is small sized.
Speaker Configuration
* Menu *****************
1.Hardware Config
2.Speaker Config
3.Speaker Distance
4.Level Calibration
5.Input Setup
6.Preference
|ENTER|Quit:|SETUP|
* Menu *****************
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Input Setup
5.OSD Setup
6.Preference
2.Speaker Config
***********************
a.Subwoofer :Yes
b.Front L/R :Small
c.Center :Small
d.Surround L/R :Small
e.Surround Back:Small
f.Crossover:80Hz(THX)
Quit:|SETUP|
* Menu *****************
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Input Setup
5.OSD Setup
6.Preference
2.Speaker Config
***********************
a.Subwoofer :Yes
b.Front L/R :Small
c.Center :Small
d.Surround L/R :Small
e.Surround Back:Small
f.Crossover:100Hz
Quit:|SETUP|
DTR-6.4 DTR-5.4
• If “Small” is selected for the Front setting, “Large” cannot
be selected for this setting.
6. Use the and cursor buttons to select “Surround L/
R” and then use the and cursor buttons to select
the surround speaker setting.
None: Select if no surround left and right speakers are
connected.
Large: Select if the surround left and right speakers are large
sized.
Small: Select if the surround left and right speakers are small
sized.
• If “Small” is selected for the Front setting, “Large” cannot
be selected for this setting.
7. Use the and cursor buttons to select “Surround
back” and then use the and cursor buttons to
select the surround back speaker setting.
None: Select if no surround back speaker is connected.
Large: Select if the surround back speaker is large sized.
Small: Select if the surround back speaker is small sized.
• If “None” is selected for the Surround setting, this setting
will not appear.
• If “Small” is selected for the Surround setting, “Large”
cannot be selected for this setting.
8. Use the and cursor buttons to select “Crossover”
and then use the and cursor buttons to select the
crossover frequency mode setting.
For setting details and descriptions, see “Adjustable Crossover
for Bass Management” on this page.
9. Press the Return button to return to the main menu.
Press the Setup button on the front panel or on the remote
controller to exit the Setup menu.
Adjustable Crossover for Bass Management
DTR-6.4
This setting allows you to set the crossover frequency for your
speaker system. The crossover frequency is the minimum frequency
delivered to a speaker and can be set to 40 Hz, 60 Hz, 80 Hz (THX),
100 Hz, 120 Hz, or 150Hz. Select “80Hz (THX)” if you are using a
THX-certified speaker system. This setting is valid when
“Subwoofer” is set to “Yes,” or for speakers that are set to “Small,”
at the “Speaker Config” menu. Frequencies below this are cut from
speakers set to “Small” and sent to the subwoofer (or to speakers set
to “Large”).
The following table lists the crossover frequency you should choose
depending on the diameter of your front spekers.
Note:
When “Large” is set, the complete frequency range for that speaker
channel will be output. When “Small” is set, the frequencies below
80 Hz for that speaker channel are output to the subwoofer. If
Subwoofer is set to “No” in the Speaker Config menu, then they
will be output to the left and right front speakers. (Set all speakers
for THX speaker systems to “small.”)
Front speaker diameter crosscover frequency
Larger than 12" (30 cm) 40
8"~12" (20-30 cm) 60
6-1/2"~8" (16-20 cm) 80 (THX)
5-1/4"~6-1/2" (13-16 cm) 100
3-1/2"~5-1/4" (9-13 cm) 120
Less than 3-1/2" (9 cm) 150