Filter
Top Products
Autoloader Operation
97SSL1016 Tape Autoloader Reference Guide
4. Press Enter.
If a check appears next to Compression, the compression option is enabled. If
no checkmark appears, the compression option is disabled.
a. To leave the compression option unchanged, press Escape.
b. To change the compression option, press Enter.
Update Firmware
Autoloader firmware can be updated by using Library & Tape Tools (L&TT).
Additional details can be obtained at:
http://www.hp.com/support/tapetools
Configuration
To change any Ethernet configurations, see “Ethernet” in Chapter 2.
Import/Export Slot
Note: Any change requires a power cycle of the autoloader and reconfiguration of the
ISV software.
To change the configuration of the Import/Export slot:
1. On the main menu, scroll to Configuration.
Figure 74: Main menu
2. Press Enter.
Status
Commands
Configuration
Diagnostics