Filter
Top Products
Autoloader Operation
113SSL1016 Tape Autoloader Reference Guide
Set Ethernet Configurations
When you originally installed the autoloader, you set the Ethernet connections
through the front panel. However, you can change them through the Web
Administration tool.
To change the Ethernet configurations:
1. On any Web Administration page, click Configurations.
2. On the secondary menu, click Networking.
The current settings appear on the screen.
Figure 86: Networking options
3. If a checkmark appears in the box next to DHCP, the dynamic IP address
option is enabled. To set a permanent IP address:
a. Click the box to remove the checkmark.
b. In the IP address fields, type in the new address, using your Tab key to
move from box to box.
4. If no checkmark appears in the box next to DHCP, the permanent IP address
option is enabled. To change a permanent IP address, in the IP address fields,
type in the new address, using your Tab key to move from box to box.