Filter
Top Products
Autoloader Operation
104 SSL1016 Tape Autoloader Reference Guide
Run Diagnostic Tests
If the status information indicates an error, view the event log.
To view the event log:
1. On any Web Administration page, click Diagnostics.
Figure 79: Diagnostic page
2. Click View Log.
Note: See Chapter 6, “Troubleshooting,” for a list of error messages.
When an error message appears in the status information, you may need to run a
diagnostic test.
To run a diagnostic test:
1. On any Web Administration page, click Diagnostics.
2. From the Test drop-down menu, select the diagnostic test that you want to run.
3. Click submit.