Filter
Top Products
Autoloader Operation
83SSL1016 Tape Autoloader Reference Guide
Installing a Magazine
To install a magazine:
Note: Be sure you are using the proper magazine for your autoloader. DLT/SDLT
magazines are not compatible with the SSL1016 Ultrium 460 Autoloader. Ultrium
magazines are not compatible with the SSL1016 DLT1 Autoloader or the SSL10106
SDLT 320 Autoloader.
1. Grasp the magazine by the handle with one hand and support it underneath
with the other hand.
2. Slide the magazine into the magazine bay. Make sure you position the
magazine correctly; it should slide smoothly.
Caution: Be sure that you install only a left-oriented magazine in the left bay
and a right-oriented magazine in the right bay.
Figure 55: Installing a magazine
3. The magazine is correctly installed when you feel it click into place and the
front is flush with the front panel. Left Mag Inserted or Right Mag Inserted
appears on the LCD.