Filter
Top Products
Autoloader Operation
74 SSL1016 Tape Autoloader Reference Guide
LEDs
The LEDs display autoloader and drive status information. When the autoloader is
powered on, the left, green LED gives ready status information, and the right,
amber LED gives fault status information.
LCD
The LCD displays a scrolling menu that lets you to access information and
execute commands.
Note: When the autoloader is idle for more than 60 seconds, the logo screen appears
on the LCD, similar to the screensaver function on your PC. Press any function key to
display the top-level menu.
The four menus displayed on the LCD are circular menus; you can scroll through
the options using either the up or down scroll buttons. The first menu you access
on the front panel contains the top-level menu items. Each item in turn contains
submenus.
Table 7: Indicator Activity
Indicator State Operating Condition
Left (green) On
Slow Flash
Fast Flash
Autoloader and tape drive are idle.
Tape drive only is active.
Autoloader only is active or autoloader and
tape drive are active.
Right (amber) Off
On
Continuous flash
Brief flash
No errors or problems detected.
Tape drive or autoloader error is detected.
Non-hardware error is detected (for example,
cleaning is required.
POST in progress