Filter
Top Products
Autoloader Operation
81SSL1016 Tape Autoloader Reference Guide
An hourglass appears on the LCD as the cartridge you want is ejected from the
mailslot.Wait until the hourglass disappears from the LCD before pulling out the
cartridge.
To eject a cartridge from the tape drive:
1. On the main menu, scroll to Commands.
2. Press Enter.
3. On the Commands submenu, scroll to Eject.
4. Press Enter.
5. On the Eject submenu, scroll to Cartridge.
6. Press Enter.
7. Scroll to From Drive.
8. Press Enter.
An hourglass appears on the LCD as the cartridge you want is ejected from the
mailslot. Wait until the hourglass disappears from the LCD before pulling out the
cartridge.
Note: After ejecting a single cartridge, immediately remove it from the mail slot when
prompted.
Removing a Magazine
When you want to remove several cartridges at once, remove the magazine(s)
first.
To remove a magazine:
1. On the main menu, scroll to Commands.
2. Press Enter.
3. On the Commands submenu, scroll to Eject.
4. Press Enter.
5. On the Eject submenu, scroll to Right Magazine or Left Magazine.
6. Press Enter.