Filter
Top Products
DEVICE DESCRIPTIONS
PROANNOUNCE System User Handbook 1.1
5-59
5.4.4 DCS 409 CONTROL RELAY MODULE
The module is for mounting on the rear of PA-system rack-shelves or inside of suitable distribution boxes. It is utilized
for switching audio signals (at line level) or for control outputs.
Features
· 5 LF-relays, 2 switching contacts each, binding post for each contact
· Gold-plated contacts
· Additional ground potential binding posts for each relay's primary and secondary end
· 5 relay control-LED’s
· Configuration of the output distributor is performed through opening wire bridges
· 2 connectors for cascading up to 12 modules
· 2 binding posts for the connection of an external supply voltage source
Installation Note
Mounting the module and establishing the connections are solely admissible when performed in accordance to VDE
0100 and EN 60065 regulations.
DCS 409 control relay module printed board assemblies need to be grounded at their fixing points (e.g. using a metal
bolt).
Specifications:
Description
DCS 409 control relay module
Operating voltage
24 V DC, -10 / +30 %
Operating current, relay dropped
5.2 mA .. 7.8 mA
Operating current, relay dropped, at 24 V
5.5 mA
Operating current, all relays pulled
55 mA .. 80 mA
Operating current, all relays pulled, at 24 V
60 mA
Relay contacts:
Contact components
2 changers/ 2 SPDT
Contact material
AgPd + 10µ Au
Contact load (ohmic load)
1 A / 24 V DC
Contact current, maximum
2 A
Operating temperature range
+5° C .. +40° C
Dimensions (W x H x D)
160 x 17 x 100 mm
Weight
155 g