Filter
Top Products
INTRODUCTION
PROANNOUNCE System User Handbook 1.1 1-1
1. INTRODUCTION
Preamble
Thank you for choosing the DYNACORD PROANNOUNCE System. With the PROANNOUNCE System you
purchased a high-quality product which is going to satisfy your highest demands. This extraordinarily flexible and
versatile system allows the configuration of either small or complex installations as well. Most functions are realized
through software modules, which - when compared to conventional PA-systems – not only reduces the amount of
cabling but also the costs. Next to extensive audio signal generating and distribution functions, the PROANNOUNCE
system provides ample control functions. On one hand, these functions offer the possibility to register and rate
external events, as well as to control different external components, on the other hand. Boolean operations and
relations to the internal state of the system can be programmed as well.
To be able to take advantage of all possibilities that are offered by the PROANNOUNCE system, we would like to ask
you to read this handbook carefully. For getting a quick overview about the PROANNOUNCE system's components
and functions, we recommend consulting the chapter System Description.
Owner’s Manual
This handbook provides all the information that is necessary for planning and installing a PROANNOUNCE system.
The handbook is structured in different chapters, each explaining a specific component or function. Thus, you can skip
a section, if it is of no relevance for your particular application. The following table lists all chapters included in the
handbook. It is meant as a guide for finding relevant information as quickly as possible.
1. Introduction Notes on how to use the handbook
2. Operation Instructions Precautions, operational conditions, environmental conditions, location,
initial operation, maintenance and service
3. System Description Overview of all components (appliances), audio and control functions of
the PROANNOUNCE system
4. Installation Notes on how to install the PROANNOUNCE DESIGNER
configuration software
5. Single Device Descriptions Detailed descriptions of all PROANNOUNCE components: central unit with
modules, paging stations, power amplifiers, monitoring system
6. Appendix Notes on how to configure the hardware, wiring, and initial operation