Filter
Top Products
46
ENGLISH
Room EQ / Tone control setting
• Use the Room EQ setting and the tone control setting to adjust the bass and treble as desired.
• Operate the Room EQ and the tone control from the remote control unit.
1
Press the surround parameter button.
Display the surround parameter screen.
The screen selected surround mode
appears.
“TONE” cannot be selected in the Direct
mode.
(Remote control unit)
2 ~ 6
7
1, 8
ROOM: Medium
*Surr Parameter
2
Select
“EQ/TONE”.
EQ/TONE
*Surr Parameter
3
Display the Room EQ / Tone Control screen.
(Remote control unit)
Room EQ OFF
*Room EQ/Tone
6
Select Bass or Treble. Set the level.
7
Enter the setting.
The surround parameter
menu screen reappears.
8
If the setting ends, press the
“ENTER” or “SURROUND
PARAMETER” button again.
1
Turn the SELECT knob to select the surround
mode.
1 1, 32
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter
button to select the parameter you want to set.
• The parameters which can be set differ for
the different surround modes. (Refer to
“Surround Modes and Parameters” on page
47.
3
Display the parameter you want to adjust, then
turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog
signals in the DOLBY PRO LOGIC II, DTS NEO:6
modes and the input signal switches to a digital
signal encoded in Dolby Digital, the Dolby
surround mode switches automatically. When
the input signal switches to a DTS signal, the
mode automatically switches to DTS surround.
• Operating the surround mode and surround parameters from the main unit‘s panel.
• When turned clockwise
• When turned counterclockwise
DIRECT
VIRTUAL
STEREO
DOLBY PRO LOGIC
IIx
DTS NEO:6 5/7CH STEREO WIDE SCREEN SUPER STADIUM
ROCK ARENAJAZZ CLUBCLASSIC CONCERTMONO MOVIEVIDEO GAMEMATRIX
To select the surround mode while adjusting the surround parameters or tone control, press the
surround mode button then operate the selector.
(Remote control unit)
(Remote control unit) (Remote control unit)
(Remote control unit)
(Remote control unit)
(Main unit)
DIRECT
VIRTUAL
STEREO
DOLBY PRO LOGIC
IIx
DTS NEO:6 5/7CH STEREO WIDE SCREEN SUPER STADIUM
ROCK ARENAJAZZ CLUBCLASSIC CONCERTMONO MOVIEVIDEO GAMEMATRIX
SELECT
(Main unit) (Main unit)
5
Select Tone Defeat OFF.
Tone Def.: OFF
*Room EQ/Tone
Room EQ Normal
*Room EQ/Tone
NOTES:
• The equalizer setting of Normal, Flat, and Front can be selected after performing the Auto Setup.
• When headphone is connected, the Room EQ cannot be used.
4
Select the Equalizer setting.
(Remote control unit)
OFF Normal Front
Manual Flat
(Remote control unit)
• Operate the Room EQ from the main unit.
1
Press the SURROUND
PARAMETER button.
• Display the surround
parameter screen.
31, 2
3
SELECT
(Main unit)
Select the Equlizer setting.
(Main unit)
Room EQ OFF
*Surr Parameter
2
Select “EQ”.
(Main unit)