Filter
Top Products
42
ENGLISH
Dolby Digital mode (only with digital input) and DTS Surround mode (only
with digital input)
Playback with a digital input
1
Select the input source.
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 22).
w Set the input mode to “AUTO” or “DTS”.
2
Select the STANDARD (Dolby/DTS Surround)
mode.
21-q
4, 5 2, 631-w
6
2
1-q
5
6
7
4, 7
3
1-w
5
3
3
3
Play a program source with the , mark.
• The DTS indicator lights when playing DTS sources.
• Press the SURROUND BACK button.
Lights when the Surround Back CH is on.
• The Dolby Digital indicator lights when playing Dolby Digital sources.
4
Display the surround parameter menu.
5
Select the various parameters.
6
Adjust the parameter settings.
2 Dialogue Normalization
The dialogue normalization function is activated
automatically when playing Dolby Digital program
sources.
Dialogue normalization is a basic function of Dolby
Digital which automatically normalizes the dialog level
(standard level) of the signals which are recorded at
different levels for different program sources, such as
DVD, DTV and other future formats that will use Dolby
Digital.
These contents can be verified with the STATUS and
ON SCREEN button.
The number indicates the normalization level
when the currently playing program is
normalized to the standard level.
Offset -4dB
Dial.Norm
Display
NOTE: The display on the screen differs depending on whether you are performing the operation from
the main unit or the remote control unit.
Light
(Remote control unit)
FUNCTION
(Main unit)
MODE
(Remote control unit)(Main unit)
SELECT
(Main unit) (Remote control unit)(Main unit)
(Remote control unit)(Main unit)
(Remote control unit)(Main unit)
(Remote control unit)(Main unit)
SELECT
(Main unit) (Remote control unit)
NOTE:
• When “Default” is selected and the CURSOR
left button is pressed, “CINEMA EQ.” and
“D.COMP.” are automatically turned off, “LFE”
is reset, and the tone is set to the default value.
7
When the surround parameters are set using
the buttons on the main unit, stop operating
buttons after completing the settings. The
settings are automatically finalized and the
normal display reappears after several seconds.
When the settings are made using the buttons
on the remote control unit, press the “ENTER”
or “SURROUND PARAMETER” button to
finish.
Light
Light
Light