Filter
Top Products
30
ENGLISH
The included remote control unit can be used to operate devices of different brands by registering the preset
number corresponding to the brand of your device.
For some models the remote control unit or the device may not operate properly. In this case, use the learning
function (page 31) to store your device’s remote control signals in the included remote control unit.
Preset memory
1
Press the power ON/SOURCE button and the
OFF button at the same time.
• The LEARNED/TX indicator flashes.
2
3
Referring to the included List
of Preset Codes, use the
number buttons to input the
preset code (a 4-digit
number) for the manufacturer
of the component whose
signals you want to store in
the memory.
1
2
3
456
789
0
4
When stored correctly, the mode button and
the LEARNED/TX indicator will light.
5
To store the codes of another component in the
memory, repeat steps 1 to 4.
1
3
1
2
Press the mode button of the equipment that is
to be entered to a preset memory.
• The mode button flashes.
NOTES:
• Depending on the model and year of
manufacture, this function cannot be used for
some models, even if they are of makes listed on
the included list of preset codes.
• Some manufacturers use more than one type of
remote control code. Refer to the included list of
preset codes to change the number and check it
out.
• The preset memory can be set for one
component only among the following:
CDR/MD, DVD/VDP and DBS/CABLE.
The preset codes are as follows upon shipment from
the factory and after resetting:
TV, VCR..........................................HITACHI
CD, TAPE .......................................DENON
CDR/MD ........................................DENON (CDR)
DVD/VDP .......................................DENON (DVD)
DBS/CABLE ...................................ABC (CABLE)
DVD preset codes
B
Model No.
DVD-700
DVD-900
DVD-1000
DVD-1400
DVD-1500
DVD-2200
DVD-2800
DVD-2800II
DVD-2900
DVD-3800
DVD-A11
DVD-A1
DVD-800
DVD-1600
DVD-2000
DVD-2500
DVD-3000
DVD-3300
0000 0001
Operating a component stored in the preset memory
1
Press the mode selector button for the
component you want to operate.
1
NOTE:
• For the DVD player remote control buttons,
function names may differ according to
manufacturer. Compare with the remote control
operation of the various components.
2
Operate the component.
• For details, refer to the component’s operating instructions.
Some models cannot be operated with this remote control unit.
1. Digital video disc player (DVD, DVD SETUP)
system buttons
POWER : Power on/standby
(ON/SOURCE)
0~9, +10 : 10 key
1 : Play
2 :Stop
8,9 : Auto search
(to beginning of track)
6,7 : Manual search
(forward and reverse)
3 : Pause
DISC SKIP + : Disc skip
(for DVD changer only)
SETUP : Setup
MENU : Menu
DISPLAY : Display
RETURN : Return
•, ª,
0
,
1
: Cursor up, down, left
and right
ENTER : Enter
2. Video disc player (VDP) system buttons
POWER : Power on/standby
(ON/SOURCE)
0~9, +10 : 10 key
1 : Play
2 :Stop
8,9 : Auto search (cue)
6,7 : Manual search
(forward and reverse)
3 : Pause