Filter
Top Products
25
ENGLISH
4-3 Setting the Auto Surround Mode
The surround mode used at last for the three types of input signals shown below is stored in the memory, and
the signal is automatically played with that surround mode the next time it is input.
Note that the surround mode setting is also stored separately for the different input sources.
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY PL IIx cinema)
e Multi-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY/DTS SURROUND)
Default settings are indicated in ( ).
During playback in the PURE DIRECT mode, the surround mode does not change even if the input signal is
changed.
1
Select “Auto Surround Mode” at the Advanced
Playback Menu.
Auto Surround
*Advanced Play
2
Press the ENTER button.
Display the Auto Surround Mode screen.
3
Select “ON” if you want to use the auto surround mode,
“OFF” if you do not want to use it.
ON/OFF: ON
*Auto Surround
4
Enter the setting.
The Advanced Playback Menu reappears.
1
2
Select “Option Setup” at the System Setup Menu.
Display the Option Setup Menu Screen.
Option Setup
*System Setup
Setting the Option Setup
5
5-1 Setting the Power Amplifier Assignment
Make this setting to switch the power amplifier for the surround back channel to ZONE2.
If ZONE2 is selected, the signal that selected at ZONE2 is output at “SURR. BACK ZONE2 PREOUT” terminals.
1
Select “Power Amp Assign” at the Option Setup Menu.
P.Amp Assign
*Option Setup
2
Press the ENTER button.
Display the Power Amp Assign screen.
3
Select “Surround Back” to use as the surround back channel, “Zone2” to use as
Zone2 out.
S.Back
*P.Amp Assign
When “Surround Back” is
selected
When “Zone2” is selected
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
4
Enter the setting.
The Option Setup Menu reappear.
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
Contents stored in the auto surround mode can be
checked with the on-screen display.
(Remote control unit)