Filter
Top Products
40
ENGLISH
Fader function
• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels
(SL, SR, SBL and SBR) together. Use it for example to adjust the balance of the sound from each position
when multi-channel music sources are played.
1
Select “FADER”.
This is only displayed when setting the fader control.
2
1
2
FL C FR SR SBR SBL
SLSW
FADER
The channel switches in the
order shown below each
time this button is pressed.
2
Press the CURSOR left
button to reduce the volume
of the front channels, the
CURSOR right button to
reduce the volume of the rear
channels.
The fader function does not affect the SW
channel.
The channel whose channel level is adjusted
lowest can be faded to –12 dB using the fader
function.
If the channel levels are adjusted separately after
adjusting the fader, the fader adjustment values
are cleared, so adjust the fader again.
Front : Rear
*Fader Vol.
2
Play a program source with the mark.
• For operating instructions, refer to the manuals of the respective components.
Dolby Pro Logic
II
x (Pro Logic
II
) mode
To play in the PL IIx mode, set “Sp.Back” at the Speaker Configuration setting to “1Spkr” or ”2Spkrs”.
To play in the PL IIx mode, set “Surround Back” at the Power Amp Assign setting.
1
3, 5 1, 4, 6
1
Select the Dolby Pro Logic IIx mode.
4, 6
1
5
4, 6
7
3, 7
5
The Dolby Surround
Pro Logic IIx Cinema
or Music mode can be
chosen directly by
pressing the CINEMA
or MUSIC button on
the remote control
unit during playback in
the Dolby Pro Logic
IIx mode.
3
Set the surround parameter mode.
(Remote control unit)(Main unit)
MODE: PLIIx C
*Surr Parameter
4
Select the play mode.
NOTE:
• The PLIIx mode is set when the “SB CH OUT”
surround parameter is set to “ON”, and the PLII
mode is set when this parameter is set to “OFF”.
Display
• When the “SB CH OUT” parameter is set to “ON”.
(Set “SP.Back” at the system set up to “1spkr” or “2spkrs”).
MODE: PLIIx C
*Surr Parameter
MODE: PLIIx M
*Surr Parameter
(Pro LogicIIx Cinema mode) (Pro LogicIIx Music mode)
MODE: PLIIx G
*Surr Parameter
(Pro LogicIIx Game mode)
Display
• When the “SB CH OUT” parameter is set to “OFF”.
(Set “SP.Back” at the system set up to “None”).
(Pro LogicII Cinema mode)
(Pro LogicII Music mode)
(Pro LogicII Game mode)
(Dolby Pro Logic mode)
MODE: PLII G
*Surr Parameter
MODE: PLII C
*Surr Parameter
MODE: PLII M
*Surr Parameter
*Surr Parameter
MODE: DOLBY PL
(Remote control unit)
(Remote control unit)
SELECT
(Main unit) (Remote control unit)(Main unit)
SELECT
(Main unit) (Remote control unit)
The on-screen display differs according to whether the
operation is performed from the main unit or the
remote control unit.
5
Select the parameter to change. (See “Surround parameters q” for a description of each parameter.)
(Remote control unit)
Ex : DOLBY PLIIx music mode screen.
When set with the on-screen display using the remote control unit while in the MUSIC mode, set the
“” mark to “OPTION
0
” using the CURSOR up and down buttons, then press the CURSOR left
button.
Press the ENTER button to return to the previous screen.
(Main unit)