Filter
Top Products
12
ENGLISH
4. Advanced Playback
Advanced Playback Default settings
Audio Delay
Dolby Digital
Setup
Auto
Surround
Mode
Set the audio delay to delay time the sound and
synchronize it with the picture.
Turn the audio compression on or off when down-
mixing Dolby Digital signals.
Set the Auto surround mode function.
0 ms
OFF
Auto Surround Mode = ON
1
2
3
5. Option Setup
Option Setup Default settings
Trigger Out1
Setup
Trigger Out2
Setup
Muting Level
On Screen
Display
Setup Lock
Set the Trigger Out1 output for the each input
sources.
Set the Trigger Out2 output for the each input
sources.
This sets the amount of attenuation at audio
output muting.
This sets whether or not to display the on-screen
display that appears on the monitor screen when
the controls on the remote control unit or main unit
are operated.
A setting to prevent flickering.
Set whether or not to lock the system setup
settings so that they cannot be changed.
ZONE=MAIN
ZONE=2
---dB (minimum)
On Screen Display = ON / Mode 1
Setup Lock = OFF
1
2
Power AMP
Assignment
Set this to switch the surround back channel’s
power amplifier for use for zone2.
Surround Back
3
4
5
6
7
Zone2 vol.
Level
This sets the output level the zone2 output jacks.
This menu is not displayed, when “ZONE2” is
selected at Option Setup “Power Amp Assign”.
Variable
PHONO
PHONO
CD
CD
TUNER
TUNER
DVD
DVD
TV
TV
VDP
VDP
CDR/
TAPE
CDR/
TAPE
DBS
DBS
VCR-1
VCR-1
OFF
ON
OFF
ON
OFF
ON
ON
ON
ON
ON
ON
ON
OFF
ON
ON
ON
ON
ON
VCR-2
VCR-2
ON
ON
V. AUX
V. AUX
ON
ON
NOTES:
• The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback
of a video component. For example, if the TV monitor is connected to both the AVR-2805’s S-Video and
video monitor output jacks and signals are input to the AVR-2805 from a video source (VDP, etc.) connected
to both the S-Video and video input jacks, the on-screen display signals are output with priority to the S-
Video monitor output. If you wish to output the signals to the video monitor output jack, do not connect a
cord to the S-VIDEO MONITOR OUT jack. (For details, see page 28.)
• The AVR-2805’s on-screen display function is designed for use with high resolution monitor TVs, so it may
be difficult to read small characters on TVs with small screens or low resolutions.
• The setup menu is not displayed when headphone are being used.
• Speaker system layout
Basic system layout
• The following is an example of the basic layout for a system consisting of eight speaker systems and a
television monitor:
Subwoofer Center speaker system
Surround speaker systems
Surround back speaker systems
Front speaker systems
Set these at the sides of the TV or
screen with their front surfaces as flush
with the front of the screen as possible.