Filter
Top Products
28
ENGLISH
5-7 Protecting the setting
The system setup settings can be locked so that they cannot be changed easily.
1
Select “Setup Lock” at the Option Setup Menu.
Setup Lock
*Option Setup
2
Display the Setup Lock screen.
3
Select “ON”, to lock the system setup settings.
ON/OFF: OFF
*Setup Lock
4
Press the “ENTER”button to finalize the setting and exit the Option setup mode.
When the setup lock function is activated, the settings listed below cannot be
changed, and “SETUP LOCKED” is displayed when related buttons are operated.
• System setup settings
• Surround parameter settings
• Tone control settings
• Channel level settings (including test tones)
To unlock, press the System Setup button again and display the Setup Lock screen,
then select “OFF” and press “ENTER”.
System setup is complete. Once these settings are made, there is no need to change them unless
different AV components are connected or the speakers are repositioned.
After completing system setup
1
Press the SYSTEM SETUP button at the System Setup Menu.
The changed settings are entered and the on-screen display turns off.
(Remote control unit)
• On-screen display signals
1
2
3
4
Signals input to the AVR-2805 On-screen display signal output
VIDEO signal
input jack
(yellow)
S-video signal
input jack
Video signal output to
VIDEO MONITOR OUT
jack (yellow)
Video signal output to
S-Video MONITOR
OUT jack
E
C
C
E
E
E
C
C
C
C
E
C
C
C
C
C
(
C
: Signal
E
:
No signal)(
C
: On-screen signals output
E
:
On-screen signals not output)
NOTE:
• When a component video signal is input and when the “Video Input Mode” is set to the component fixed
mode at Input setup, the on-screen display is only displayed when the System Setup, Surround
Parameters and On Screen buttons are operated.
Video signal output to Color
Difference (Component) Video
MONITOR OUT jack
C
C
C
C
This button can be pressed at any time during the system setup process to complete the process.
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)