Filter
Top Products
17
ENGLISH
1-6 Check the EQ parameter
• The frequency characteristic of each speaker is rectified and the tone of the speaker is unified.
The EQ parameters that were set in Auto Setup can be checked.
This item is automatically displayed, after the measurement result of the “Auto Setup / Room EQ” is decided.
1
Select “EQ Parameter Check” at the Auto Setup / Room
EQ Menu.
2
Display the EQ Parameter Check screen.
(Remote control unit)
(Remote control unit)
3
Select the Equalizer curve.
4
Dislay the parameter screen.
5
Select the speaker channel.
7
If the check ends, select “Exit”
and press the ENTER button.
The Auto Setup / Room EQ
Menu reappears.
8
Select “Exit” and press the
ENTER button at the Auto Setup
/ Room EQ Menu screen.
The System Setup Menu
reappears.
(Remote control unit)
(Remote control unit)
Parameter Check
*AutoSet/RoomEQ
1:Normal
*ParameterCheck
(Remote control unit)
(Remote control unit)(Remote control unit)
6
Enter the setting.
(Remote control unit)
(Remote control unit)(Remote control unit)