Filter
Top Products
37
ENGLISH
1
[5] Checking the currently playing program source,
etc.
1
11
[4]
Combining the currently playing sound with the
desired image
Cancelling simulcast playback.
• Select “SOURCE” using the VIDEO
SELECT button and the FUNCTION button.
• Switch the program source to the
component connected to the video input.
• Press the SOURCE button.
Simulcast playback
Use this switch to monitor a video source other
than the audio source.
Press the VIDEO SELECT button, turn the
FUNCTION knob until the desired source
appears on the display.
VIDEO
SELECT
FUNCTION
(Main unit)
VIDEO SOURCE
FUNCTION
On screen display
• Each time an operation is performed, a
description of that operation appears on the
display connected to the unit’s VIDEO
MONITOR OUT jack. Also, the unit’s operating
status can be checked during playback by
pressing the remote control unit’s ON
SCREEN button.
Such information as the position of the input
selector and the surround parameter settings
is output in sequence.
Front panel display
• Descriptions of the unit’s operations are also
displayed on the front panel display. In
addition, the display can be switched to check
the unit’s operating status while playing a
source by pressing the STATUS button.
(Remote control unit)
(Main unit)
1
1 1
Using the dimmer function
• Use this to change the brightness of the
display.
The display brightness changes in four steps
(bright, medium, dim and off) by pressing the
main unit’s DIMMER button repeatedly.
(Main unit)
Playing one source while recording another (REC OUT mode)
Multi-source recording/playback
1
Press the ZONE2 / REC SELECT button.
NOTES:
• Recording sources other than digital inputs
selected in the REC OUT mode are also
outputted from the Zone2 preout jacks.
• Digital signals are not outputted from the analog
REC OUT jacks.
ZONE 2 /
REC SELECT
(Main unit)
2
With “RECOUT SOURCE” displayed, turn the
FUNCTION knob to select the source you wish
to record.
• When the FUNCTION goes around, it turn to
the “REC” indicator and the indicator of the
selected source light.
3
Set the recording mode.
• For operating instructions, refer to the manual
of the component on which you want to
record.
4
To cancel, turn the function knob and select
“SOURCE”.
2, 4
1
Display
(Main unit)
FUNCTION
(Main unit)
FUNCTION
(Main unit)
RECOUT SOURCE
FUNCTION
Display