Filter
Top Products
20
ENGLISH
2-3 Setting the Channel Level
• Use this setting to adjust so that the playback level between the different channels is equal.
• From the listening position, listen to the test tones produced from the speakers to adjust the level.
• The level can also be adjusted directly from the remote control unit. (For details, see page 39.)
1
Select “Channel Level” at the Speaker Setup Menu.
Channel Level
*Speaker Setup
2
Display the Channel Level screen.
T.Tone: Auto
*Channel Level
3
Select the mode.
Select “Auto” or “Manual”.
T.Tone: Auto
*Channel Level
• Auto:
Adjust the level while listening to the test tones
produced automatically from each speaker.
• Manual:
Select the speaker from which you want to produce
the test tone to adjust the level.
4
Select “Test Tone Start”.
Tone Start:Yes
*Channel Level
5
Select “Ye s”.
Use the CURSOR left and right buttons to adjust all the
speakers to the same volume.
The volume can be adjusted between –12 dB and +12
dB in units of 0.5 dB.
Example: When the volume is set to
–11.5 dB while the test
tone is being produced
from the Front Lch speaker
FL C FR SR SBR SBL SL SW
SB
1spkr
2spkrs
When the surround back speaker setting is set to
“1spkr” for “Speaker Configuration”, this is set to
“SB”.
6
a. When the “Auto” mode is selected:
Test tones are automatically emitted from each
speaker.
The test tones are emitted from each speaker in the
following order, at 4-second intervals the first time
and second time around, 2-second intervals the third
time around and on:
Flashing
b. When the “Manual” mode is selected :
FL : -11.5dB
TestTone Auto
q Select the speaker. w Adjust all the speakers to the same
volume.
7
Enter the setting.
The “Channel Level” screen reappears.
To cancel the settings, press the CURSOR down to select “Level Clear” and “Yes” on the “Channel Level”
screen, then make the settings again.
Example: When the “Auto”
mode is selected
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)(Remote control unit)
(Remote control unit)
When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel
level adjustments made will affect all surround modes. Consider this mode a Master Channel Level
adjustment mode.
After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the
individual surround modes and adjust channel levels that will be remembered for each of those modes.
Then, whenever you activate a particular surround sound mode, your preferred channel level adjustments
for just that mode will be recalled. Check the instructions for adjusting channel levels within each
surround mode. (See page 39)
You can adjust the channel levels for each of the following surround modes: PURE DIRECT/DIRECT,
STEREO, DOLBY/DTS SURROUND, 5/7 CH STEREO, WIDE SCREEN, SUPER STADIUM, ROCK ARENA,
JAZZ CLUB, CLASSIC CONCERT, MONO MOVIE, VIDEO GAME, MATRIX and VIRTUAL.