Filter
Top Products
96
<PRE1282>
En
Activating the AUTO PAUSE mode
In playback mode a pause function can be enabled to stop the
playback at the end of each track. This is a useful function
when a single track is required without hearing the start of
the next track.
1 Press the MENU button repeatedly until
“A-PA
xxx
” is displayed.
2 Use the 41 ¡¢ buttons to turn the
AUTO PAUSE function ON or OFF.
• Initial setting is OFF.
• When the original setting is changed, a question mark “?”
blinks next to the selected option.
3 Press the SKIP ID SET button to memorize the
setting.
• The question mark disappears from the display and the new
setting is memorized.
• When this function is on, “P” appears in the display next to
the track number.
4 Press the 7 button to exit the MENU mode.
PLAYBACK
1
MENU
2
3
SET
SKIP ID
CLEAR
132
4
123
REPEAT
FADER
TRACK NO.
WRITE
2
4
4