Filter
Top Products
108
<PRE1282>
En
PLAYING TRACKS IN A SPECIFIC ORDER (PROGRAMMED
PLAYBACK)
Clearing the entire program
The program can be cleared with either A or B below.
A Press the 7 button to stop programmed
playback, then press the 7 button again to exit
the program mode.
B Press the OPEN/CLOSE 0 button.
Clearing a track from the program
C Press the CLEAR button on the remote control
unit.
Each press clears the last track in the program and moves
in reverse order to the beginning.
÷ If the button is pressed during programmed playback, the
tracks after the track being played can be cleared.
Checking the programmed tracks
D Press the CHECK button on the remote control
unit.
Each press displays the track number programmed for
each step of the program.
1Program step number.
2Programmed track number.
÷ This operation is available in stop mode after tracks have
been programmed. If the programmed tracks are being
played, stop playback before proceeding with this operation.
÷ When the button is pressed while the last step of the
program is displayed, “00” is displayed. Press the CHECK
button again to display the first program step.
Press 2 times.
Appuyez 2 fois.
Pulse 2 veces.
1
2
A
B
C
D
OPEN/
CLOSE
CLEAR
CHECK
OPEN/CLOSE 0
7
123
456
789
10 >10
TIME
PGM CHECK CLEAR
COMPACT DISC RECORDER
REMOTE CONTROL UNIT
CHECK CLEAR
7