Americana Appliances CDR-850 Stereo System User Manual


 
115
<PRE1282>
Fr/Sp
EnglishFrançaisEspañol
Term
CD-R disc:
CD-RW disc:
SCMS:
Skip:
Skip ID:
Skip ON/OFF:
TOC:
PMA:
Track number updating:
Digital synchro recording
(automatic digital recording):
Disc identification:
Disc damage:
Fader:
Finalization:
Write-once:
Label side:
Remaining recording time:
Total recording time:
RESUME:
Recording permitted/
inhibited:
Function
Compact Disc - Recordable.
Compact Disc-Rewritable.
Serial Copy Management System. Industry adopted system for restricting
personal digital recording (home-use recording) for copyright protection.
Function which can be used to skip over undesired tracks.
Identification which sets or cancels skipping of undesired track before disc
finalization.
Switching on/off of the function to skip undesired tracks to which skip IDs have
been set.
Table Of Contents of a disc which allows it to be played on standard CD players.
Program Memory Area. The area used for temporary storage of TOC data until
finalization of a CD-R or CD-RW.
Function which, either automatically or manually, updates the track number of
the track being recorded.
Function that starts and stops recording automatically by detection of ID’s,
Subcode flags, or signal level.
System operation that checks whether the loaded disc is a CD, CD-R or CD-RW.
Phenomenon which renders recording and playback of a disc impossible due to
physical shock or power failure during recording.
Function for recording or playing audio sources by smoothly increasing or
decreasing the volume at the beginning or end of the track respectively.
Operation for making a recorded CD-R disc playable on standard CD players.
A CD-R disc can be recorded only once and the recording cannot be erased.
Recording always starts from the end of previous recording.
The disc side on which letters, etc., can be printed.
Total time remaining on a disc where recording is still possible.
Elapsed time of the portion of the disc that has already been recorded on.
Operation initiated after failure during recording. Consisting of recovery of the
disc to enable further recording.
Status set with the SCMS, in which future digital recording is either enabled or
disabled respectively.
Reference pages
18, 48
18, 48
50
82, 84
82
86
86
54, 72
62, 64, 68,
80
54, 58, 60
44
76
86
42
44
42
42
74
70
GLOSSARY
En