Filter
Top Products
40
<PRE1282>
En
DISPLAY PANEL
1 SYNC
Lights when automatic digital-source synchro recording
is activated (pages 54, 58 and 60).
2 RPT-1
Lights during repeat playback (page 100).
3 PGM
Lights in the program mode (page 106).
4 #
Lights during playback.
5 FADER
Blinks during fade-in/out (pages 76 and 100).
6 *
Lights or blinks during pause.
7 Track display
Displays the track number.
8 Character display
Displays messages (pages 112 and 118).
9 Time display
Displays the elapsed playing time, remaining playing
time, total playing time, elapsed recording time,
remaining recording time, total recording time and
remaining time until the end of finalization (page 42).
0 CD-RW
Blinks during disc identification and lights steadily when
the disc format is recognized.
CD: Lights if the loaded disc is a pre-recorded CD or
finalized CDR.
CDR: Lights if the loaded disc is a CD-R disc that is
not finalized.
CD-RW: Lights if the loaded disc is a CD-RW disc.
- FINALIZE
Lights if the loaded disc is a finalized CD-RW disc (page
60 and 86).
= REC
Lights during record mode. Blinks in the record muting
mode (pages 54 to 76).
~ AUTO TRACK
Lights when automatic track number write during
recording is activated (pages 80).
! Signal level indicator
Displays the input level during record or the play level
during playback (page 68).
@ SKIP ON
Lights, goes off or blinks during skip ID setting or
clearing (pages 82 and 84).
# Sampling frequency indicator
Displays the sampling frequency (Fs) of the current
digital input. All indicators are turned off when the input
signal is interrupted.