Filter
Top Products
102
<PRE1282>
En
Turning off the digital output
This is a function to turn on or off the digital output from the
unit. This function can be used to remove the possibility of a
digital ‘loop’ in a studio environment, ensuring that the output
of the unit cannot be looped back to the input.
1 Press the MENU button repeatedly until “DO
xxx
” is displayed.
2 Use the 41 ¡¢ buttons to set whether
the digital signal is output or not (ON, OFF).
• Initial setting is ON.
• When the original setting is changed, a question mark “?”
blinks next to the selected option.
3 Press the SKIP ID SET button to memorize the
setting.
• The question mark disappears from the display and the new
setting is memorized.
4 Press the 7 button to exit the MENU mode.
PLAYBACK
1
MENU
2
3
SET
SKIP ID
CLEAR
132
4
123
REPEAT
FADER
TRACK NO.
WRITE
2
4
4