Filter
Top Products
95
Additional Information
Specifications
Amplifier section
AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
with 8 ohm loads both channels driven, from 120-
10,000 Hz; rates 90 watts per channel minimum RMS
power, with no more than 10% total harmonic
distortion from 250 milliwatts to rated output.
Total harmonics distortion
Less than 0.07%
(8 ohms at 1 kHz, 50 W)
Center Speaker:
Continuous RMS power output
40 watts
(8 ohms at 1 kHz,
10% THD)
Rear Speaker:
Continuous RMS power output
40 + 40 watts
(8 ohms at 1 kHz,
10% THD)
Canadian model:
Front Speaker:
Continuous RMS power output
100 + 100 watts
(8 ohms at 1 kHz,
10% THD)
Total harmonics distortion
Less than 0.07%
(8 ohms at 1 kHz, 50 W)
Center Speaker:
Continuous RMS power output
40 watts
(8 ohms at 1 kHz,
10% THD)
Rear Speaker:
Continuous RMS power output
40 + 40 watts
(8 ohms at 1 kHz,
10% THD)
European model:
Front Speaker:
DIN power output (rated) 80 + 80 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
100 + 100 watts
(8 ohms at 1 kHz,
10% THD)
Music power output (reference)
170 + 170 watts
(8 ohms at 1 kHz,
10% THD)
Center Speaker:
DIN power output (rated) 30 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
40 watts
(8 ohms at 1 kHz,
10% THD)
Music power output (reference)
60 watts
(8 ohms at 1 kHz,
10% THD)
Rear Speaker:
DIN power output (rated) 30 + 30 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
40 + 40 watts
(8 ohms at 1 kHz,
10% THD)
Music power output (reference)
60 + 60 watts
(8 ohms at 1 kHz,
10% THD)
Other models:
The following measured at AC 120/220/240 V,
50/60 Hz
Front Speaker:
DIN power output (rated) 95 + 95 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
120 + 120 watts
(8 ohms at 1 kHz,
10% THD)
Center Speaker:
DIN power output (rated) 30 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
40 watts
(8 ohms at 1 kHz,
10% THD)
Rear Speaker:
DIN power output (rated) 30 + 30 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
40 + 40 watts
(8 ohms at 1 kHz,
10% THD)
continued