Filter
Top Products
70
Tips
• If you want to record from the reverse side, press
TAPE B n to light its indicator after pressing
REC PAUSE/START in step 3.
• To record non-preset stations, use m and M in
step 2 to tune in the desired station manually.
• When you want to reduce the hiss noise in low-level
high-frequency signals, do the following procedure
after pressing REC PAUSE/START in step 3.
1 Press MODE SELECT repeatedly to select “Set
Up Mode”, then press PUSH ENTER.
2 Move the multi stick toward B or b repeatedly
to select “TAPE Set Up ?”, then press PUSH
ENTER.
3 Move the multi stick toward B or b repeatedly
to select “DOLBY NR Set Up ?”, then press
PUSH ENTER.
4 Move the multi stick toward B or b repeatedly
to select “On”, then press PUSH ENTER.
“DOLBY NR” appears in the display.
To return to the original setting, repeat steps 1
through 4 and select “Off” in step 4.
• When recording from a disc, you can use . or
> to select titles, chapters, or tracks during rec
pause mode (after pressing REC PAUSE/START in
step 3 and before pressing again in step 8).
• If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Recording a disc by
specifying the order
— Program Edit
You can record titles, chapters, and tracks from all
the discs in the order you want.
?/1
(Power)
Numeric
buttons
11
3,13
2
1
Recording on a tape manually
(continued)
16
1
DVD NX
x
xMm>.
nN X
nNN
TtCc
O
ENTER
B/b
V/v
V
v
bB